I use to form large-diameter 35 cm dish from the French of the service, because it is flat (almost) and not beating. I usually coated with a layer of Fae and give dry, this time decided to try to hide the plate with cling film. I have to say that I did not like it at a scrap at the end of the work plate fidgets on the film and is very difficult to cut accurately.
Quite large pieces of paper I greased with white glue and put on need glue separately, and then apply, or in any way will not be able to avoid the mounds! Top again coat with glue and fingers screed, expelling all the air bubbles out of the three. layer, and again three land layer 21 so the entire layer. Tried-less plate warp, and if more, then it becomes heavier, and to nothing, if the layer 21 is the optimum number of my practice.
Circumcised on the edge of the workpiece.
And he took off. Now you need to sand the edges, she obtained a smooth plate and does not require sanding.
I have already covered the plate filler and sanding all the irregularities.
I usually make several dishes and put them in such a way here, I leave finally dried. Because if you do not, then the plates lead, and they will not be ideal. I dry summer on the balcony, I have it hot enough, and the rest of the year on the cabinet. And before this procedure plates do not need to varnish or glue, because of the putty, as it were sealed and then bad for a long time to dry. I made this dish and forgotten for several weeks or more. So always do with a stock. Some idea comes to mind, and then you have ready for harvesting.
On top of the PVA glue pasted “buttons” from the salty .I also do pre-dried and then use as needed.
Glued flagella of napkin technique Art Pape.
To paint double white acrylic.
Behind the tongue glued on the tin glue “Master” -one sold for adhesion of ceiling tiles. For beauty, too, covered with white acrylic and all covered with acrylic gloss varnish company Lake, and in several layers.
That’s got the end result to your, the kitchen!